Automatic volumetric cups type powder filling machine is a compact model used for filling dry syrup powder in bottles.
The incoming bottle is fed through the in feed Turn Table with suitably guided on the moving delrin flat conveyor belt at the required speed for feeding. There are two separate filling head mounted on Granule Filling Machine top plate in the same line. When bottle reaches to the first filling station, it will be held by the mechanical holder. Immediately it will be sensed by the bottle sensor as soon as it gets signals from sensor magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is previously saved in PLC control.
Technical Details: : Granule Filling Machine
|Model||Granule Filling Machine – SBCF-6|
|Direction||Left To Right.|
|Production Rate||Up to 30 Bottles / Min (depend on filling volume and container neck dia.)|
|Fill Capacity||2 grms to 1000 grms. (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder.|
|Accuracy||± 1% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%)|
|No. of Cups||6|
|Electrical Supply||1.00 HP For Main Drive. 0.25 HP for conveyor|
|Power Requirement||440 Volts, 3 Phase (4 wire System) 50 Hz.|
|Height of Conveyor||Adjustable from 850 To 900 MM|