Salient Features:

  • All the parts and assemblies coming in contact with the powder are made of SBDPF-60 and easily removable for mandatory autoclaving / streilisation.
  • Multiple dosing of dry syrup powder or change over of container size and different fill size is possible by just changing the bottle separator or the size of the position respectively.
  • Total filling unit and conveyor speed is synchronised eliminates the separate setting of each unit.
  • Slat conveyor belt to prevent jamming of assembly due to spillage of powder.
  • Special clutch system is provide in the bottle separator for safety purpose.
  • ‘No bottle, No-Fill’ system eliminates wastage of costly powders.
  • High Volumetric filling accuracy of + 2% of uniform density of dry Syrup Powders can be ensured by setting the depth of piston in the PORT of the POWDER WHEEL.
  • The motor is provided with appropriate Contactors and Relays for the protection against any overload or jamming.

Technical Details:

MODEL NO. SBDPF – 60
NO OF TRACK One
NO OF POWDER WHEEL One
PRODUCTION RATE UP TO 60 Fills / Min. for SINGLE Dose
UP TO 30 Fills / Min. for DOUBLE Dose
UP TO 20 Fills / Min. for TRIPLE Dose
FILL CAPACITY 5 gms. to 30 gms.
With the help of Two Different Powder Wheel Depending on Neck diameter and Powder characteristics
ACCURACY + 2% Depending upon the consistency, uniformity & bulk density of powder under the controlled level of humidity
ELECTRICAL RATING 0.75 HP (1400 RPM) Motor
POWER REQUIREMENTS 415 Volts, 3 phase (4 Wire System) 50 Hz.
HEIGHT OF CONVEYOR Adjustable from 800 mm. to 850 mm.
DIMENSIONS 1270mm (L) x 600mm (W) x 1725mm (H)
Input Specification:
CONTAINER DIAMETER 25mm to 70mm
CONTAINER HEIGHT 55mm to 120mm Maximum

Note: Also Available SBDPF-100 Model