Automatic Injectable Powder Filling With Rubber Stoppering Machine SBPF-125
Aseptic injectable powder filling machine – Dry Powder Filling Machine – Injectable Dry Powder Filler with Rubber Stoppering Machine dosing sterile powders , Sterile Dry Powder filling line with 50 mg to 1.5 grams in single dose, 1.5 grams to 6 grams in double, triple and four dose (with help of change parts), also manufacturing customized designed as per customer requirement fill volume & Automation.
Technical Details:
Injectable dry powder filling machine – 120 model
Model No. | SBPF – 125 – Aseptic / Sterile injectable powder filler stoppering Machine |
Production Rate | UP TO 120 Fills / Min. for SINGLE Dose UP TO 60 Fills / Min. for DOUBLE Dose UP TO 40 Fills / Min. for TRIPLE Dose |
Fill Capacity | 50 Mg. to 1.5 gms. – SINGLE Dose (with the help of Two Different Powder Wheel) 1.5 gms. to 4.5 gms. – DOUBLE & TRIPLE Dose. Fill range is depending upon vial opening & bulk density of powder |
Accuracy | + 1% Depending upon the consistency, uniformity & bulk density of powder under the controlled level of humidity |
Electrical Rating | 0.75 HP (1400 RPM) Motor |
Power Requirement | 440 Volts, 3 phase (4 Wire System) 50 Hz |
Height Of Conveyor | Adjustable from 800 mm to 850 mm |
Dimension | 1715 mm (L) x 609 mm (W) x 1615 mm (H) |
Input Specification: | |
Container Diameter | 25 mm. to 45mm |
Container Height | 75 mm. Maximum |
Injectable dry powder filling machine – 240 Model
Model No. | BHAGWATI – INJECTABLE VIAL POWER FILLER -240 (Double Powder Wheel & Hopper) |
Production Output / Hrs | 3600 to 14400 vials per hours (Depend on fill volume) |
Glass Vial Sizes | 5ml to 30ml Glass Vials (Dia. 22mm to 38mm) |
Rubber Stopper / Bung | 20mm (With the help of change parts) |
Filling Volume Capacity | 50mg to 1.5 grams in single dose, 1.5 grams to 6 grams in double, triple and four dose (with help of change parts) |
Filling Accuracy | + 1 % depending upon consistency and uniformity of bulk density of sterile powder of under controlled level of humidity (Below 28% Rh) |
Electrical Supply | 3 H.P. |
Powder Requirements | 3 Phase & 1 Phase |
Note: Dimensions & Technical Details are subject to change as per customers’ requirement without any further notice
Validation in accordance with GMP standards
- Acceptance test at the manufacturers’ site (FAT) and the customers’ site (SAT)
- Design qualification (DQ)
- Installation qualification (IQ)
- Operational qualification (OQ)
- Performance qualification (PQ)

Aseptic injectable powder filling machine – Dry Powder Filling Machine – Injectable Dry Powder Filler with Rubber Stoppering Machine dosing sterile powders , Sterile Dry Powder filling line
US FDA. The Sterile powder filling line equipment we present is a compact filling and closing machine for automatic processing of vials and bottles in glass, plastic, or metal, for powders in sterile areas with different product filling line like vial dry powder filling machine, injectable dry powder filling machine, sterile dry powder filling machine with Laminar Air flow / ISOLATOR , Cabinet with close loop systems for Sterile Injectable.