- Ampoule Sizes: 1ml to 10ml Open Mouth Glass Ampoules
- Filling Capacity: From 0.5ml to 10ml in single dose
- Filling Type: Piston Pumps Type Filling (Volumetric or Peristaltic Pump)
- Contact Parts: Stainless Steel AISI 316L (For Filling Nozzle & Syringe / Pump)
- Output / Minute: 80 to 280 Ampoules / Minute (Depend on ampoules sizes)
- No. of Head for Fill & Seal: Eight (Vertical)
Application:
Ampoule Filler Machine production capacity may be adjusted depending on the size of the ampoules. For 1ml ampoules, 290 ampoules may be processed every minute. Similarly, if the ampoule size is 2ML, the output can be 270 Ampoules, 3ML 260 Ampoules, 5ML 240 Ampoules, and 10ML 150 Ampoules per Minute. Depending on the diameter of the ampoules, the actual output can range from 10% to 20%. – Tolerance and diameter are 0.25mm, and the height is 5mm.
Ampoule filling line manufacturer
The automatic glass ampoule washing sterilizing filling sealing production line is composed of ultrasonic bottle washing machine, dryer sterilizer and ampoule filling and sealing machine. It can complete spraying water, ultrasonic cleaning, air & water flushing of inner and outer wall of ampoule bottle, preheating, drying and sterilization, heat source removing, cooling, (nitrogen pre-filling), filling, (nitrogen post-filling), ampoule sealing and other complex functions, realizing automatic production of the whole process.
Each machine can be used separately or in linkage line. The whole ampoule filling line is mainly used for ampoule injections filling in pharmaceutical factories and the general type can also be used for antibiotic vial injection filling.
Product Specification:
Automatic Eight Head Ampoule Filling & Sealing Machine Bhagwati introducing a series of state of art technology Automatic Ampoule Filling & Sealing Machines, for performance and GMP demanding customers.
The machine built on principle of Slant travel of ampoules while filling and sealing. To take care of vide variation of ampoule neck dimensions, thicknesses and ovality of available Indian ampoules. The unit built on S. S. Square pipe frame and totally encompassed with S. S. Coverings, in pleasing matt finish, Further, the large opening available at the bottom side for ease of absolute cleaning. The pendant type electrical control panel is lifted form machine for ease of operation and safety.
Operation:
The sterilized ampoule tray ran be directly loaded in to slant hopper of the unit. The Synchronized star wheel delivers ampoules, one by one on moving eccentric ampoule rack in four or Four’s or Four’s.
During the stoppage of rack sequentially pre-gassing, filling, post gassing, pre heating (for Four and double head only) and final sealing I annealing is achieved. At the end to the rack, optional synchronized pusher pushes out ampoules in to tray in vertical position.
Technical Details:
TECHNICAL SPECIFICATIONS | |
Model No. | AMPOULE FILLER-300V – High Speed with to Sterilizing Tunnel |
Ampoule Sizes | 1ml to 10ml Open Mouth Glass Ampoules |
Filling Capacity | From 0.5ml to 10ml in single dose |
Filling Type | Piston Pumps Type Filling (Volumetric) |
Contact Parts | Stainless Steel AISI 316L (For Filling Nozzle & Syringe / Pump) |
Output / Minute | 80 to 280 Ampoules / Minute (Depend on ampoules sizes) |
No. of Head For Fill & Seal | Eight (Vertical) |
Require Gases For Sealing | LPG & Oxygen (Mixture) |
Nitrogen Purging | Available (Pre & Post) |
Pre Heating | Available |
Power Require | 2 H.P., 380 Volts, 3 Phase, 50 Hz (4 Wire Systems) OR 2 H.P., 220 Volts, 1 Phase, 50 Hz OR Customised |
Over All Dimensions | 2950mm (L) X 1000mm (W) X 1200mm (H) |
Net Weight | 1550 Kgs. |
Gross Weight (With Wooden Case) | 1900 Kgs. |
high speed vertical ampoule filling and sealing machine with eight heads is fairly important. In a single dosage, the output is 80 to 280 ampoules per minute with a filling capacity of 0.5ml to 10ml. Ampoule Filler And Sealer is compatible with ampoule sizes ranging from 1ml to 10ml open mouth glass ampoules. Our ampoule filling and sealing equipment are CE certified.
SLAT MODEL
Model | SBAFS – 200 |
No. of Head | Eight |
Out/Put | Up to 180 ampoules per minute Depends of the operator speed of fill volume and nature of liquid |
Ampoule Size / Range | 01 ml to 10 ml |
Powder Reqd. | 0.75 HP |
Dimensions L x W x H | 915 mm(L) x 760 mm(W) x 965 mm(H) – Approx |
Change Parts:
The Basic Unit Fitted With Parts, Suitable For any One Size Of Ampoule And Any One Fill Size Syringe1 Syringes. In The Event Of Change Over Of Each Size Of Ampoule, Following Change Parts Are Required.
- Star wheel
- Needle set
- Syringe/Syringes