>Our Machine suitable for Pharmaceuticals, Dairy, pesticides, Distilleries & Breweries, Cosmetics & Toiletries, Lube & Edible Oil, Food & Ancillaries Industries etc.
Latest Induction Cap Sealing Technology, to create alternative, airtight, hermetic seals on the necks of containers. The process can produce significant cost savings in the Packaging Process. The seal is strong, flexible & yet easy to remove and provides protection against contamination. Induction heating allows heat sensitive products such as creams, petroleum products, Herbal shampoos etc. which would normally gets spoiled or catch fire on normal heat sealing to be sealed. The sealing takes place without any direct contact which allows full potential of the filling plant to be utilized.
The process of Induction Cap Sealing is based on the principle that a conductive material i.e. Al Foil heats up on exposure to high frequency magnetic field generated by an Induction Unit. This is a non contact process without direct heat transfer. Due to this, the sealable closure liner can be placed in the cap by the manufacturer. The Wad consists of a board packing material, a wax layer, Aluminum foil and a sealable film. The screw cap combination passes through the induction unit after closure of the container. When the container is under the induction head, heat is developed into the Aluminum layer. The wax layer starts to melt and penetrates into the board layer. The Sealing layer also melts & forms a tight seal against the lip of container. The necessary pressure is provided by the liner/screw cap combination. On opening the container, the board remains inside the cap and serves as a seal on further use, whereas the aluminium foil is permanently sealed on the rim of the mouth of container.
Technical Details: :
|Model||SBCS – 500|
|Capacity||04 to 05 bottles / min (depend of bottle and Cap sizes)|
|Neck Diameter||28 mm to 63 mm|
|Input Voltage||230 Volts, 2 Ampere, single phase|
|Type||Water Cooled / Air Cooled|
|Output power||500 watts|